FAQs
More FAQs- Is urethane slippery when wet?
- How long will it take to have my floors coated with acrylic?
- Do all staff receive training and development?
Any coated surface can be slippery when wet. Our urethane product is considered to have acceptable slip resistance according to the American National Standards Institute (ANSI)/National Floor Safety Institute (NFSI) B101.3-2012 test method for measuring wet dynamic coefficient of friction (DCOF) of common hard-surface floor materials. We offer optional additives to create high slip resistance (lower probability of slipping) for wet environments or areas of concern.
Preparation will depend on the condition of the existing floor, current number of coats, repairs required, etc. When applying an acrylic finish, stripping of the old finish is usually necessary. When that’s the case, finish removal plus the application of 3 coats of finish requires 1 hour for every 150 square feet of flooring. Generally, 3 coats of finish are required to achieve the desired effect. If a floor does not require stripping, it can generally be shower scrubbed which is a procedure used for preparing a floor for receiving a new layer of finish. Once that has taken place, a floor can be recoated at anywhere from 4,000 to 6,000 square feet per hour.
All managers and supervisors receive ongoing and comprehensive training on the management of the sites they are allocated. All cleaning staff receive in-house and on-site training on process, products and equipment needed to carry out their given duties. All Health and Safety issues and company policies are covered in their initial induction with annual refresher training, as needed.